-40%
Solar panel kit 100W portable with controller foldable usb battery
$ 142.98
- Description
- Size Guide
Description
UNAVAILABLE SHIPPING TO THE USA AT THE MOMENTAbout FSP-100M
The Dokio FSP-100M integrates high efficiency monocrystalline silicon solar panels with a rugged aluminum frame.
The solar panel has a blue 10A PWM controller on the back. The controller has an easy-to-read display.(Note:The controller can only be used with batteries.)
Equipped with a 3 meter cable and alligator clip, it is a plug-and-play solar system.
Note:The controller can only be used with batteries.
Advantage:
Rainproof, waterproof. Made of tempered glass and aluminum frame, durable and durable. The service life is more than 25 years.
It has a very high cost performance. We are specialized in producing solar panels manufacturers, have more than 10 years of production experience and customer experience, a good reputation and a wide range of customer groups.
R&D team with key technologies, international certification, accept mass customization, processing! All products are certified to ISO, IEC, CE, TUV
Model:FSP-100M
Material:Monocrystalline silicon
Maximum Power(Pmax): 100W
Maximum Power Voltage(Vmp):18.00V
Maximum Power Current (Imp):5.56A
Open-Circuit Voltage (Voc): 22.50V
Short-Circuit Current (Isc):5.81A
Maximum System Voltage: DC1000V
Maximum Series Fuse:9A
Nominal Operating Cell Temp.(NOCT):-45 to 80℃
Weight: 8.1KG
Foldable Dimension:
660*530*50mm/25.98*20.86*1.96in
Expansion Dimension:
1320*530*25mm/51.96*20.86*0.98in
Package List:
1*100W Solar Panel
1*3M wire,
1*10A 12V/24V PWM controller
(The above data is based on the laboratory standard test environment) For field connections,use minimun No.12AWG copper wires insulated for a minimum 90℃
Standard Test Conditions:
AM=1.5 IRRADIANCE=1000W/m2 Temp.=25℃
(The size is manually measured and there is a certain error.) Controller support lead-acid,lithium ions and LiFePO4 battries.Controller needs battery connected to use
The controller cannot be used to test solar panels.Under sufficient light conditions, a multimeter should be used for no-load test